Designed for Functionality, Engineered for Reliability

    Contact Information : info@eikengineering.com   

EIK^® concrete crusher/pulverizer is designed with extremely versatility in mind. It has an independent high powered hydraulic cylinder/ram for exceptional crushing capability. A large, one piece (non welded) side structure with additional reinforcement is constructed from high tensile steel, essential for its intended heavy duty applications. The side structure plate also serves as a protection guard to the hydraulic cylinder/ram. Its unique geometry has been a  field proven testament for its ultimate rigidity and hours of dependable service. 

The crusher incorporates a rebar cutter, always a welcomed feature in concrete crushing and demolition work. The wide opening jaws designed with a high powered hydraulic system is well suited for recycling of concrete slabs, walls, floor slabs,  pre-cast structures, railings, and separation of concrete from rebar.

A traditional pulverizer, as shown in the picture on the left, employs similar technique as a grapple, utilizing a stiff arm welded onto the stick/dipper arm as backing to provide the crushing force. In the long run, greater wear and tear and maintenance is required on both the crusher and dipper arm.

First and foremost, installation of the traditional pulverizer is much more time consuming and labour intensive. In comparison, installing the hydraulic crusher is a breeze, and it works perfectly with a quick coupler. The main crushing mechanism comes from the built-in hydraulic system, pure and simple and it gets the job done smoothly.

Applications:
- Secondary crushing applications.
- Crushing of industrial material.
- Handling of waste material for recycling industries.

Features:

- Built-in blades at the back of the jaws for cutting of re-bar.

- Replaceable cutting blades.

- High powered cylinder designed to quickly reduce concrete chunks into aggregate.
- Large single piece (non welded) rigid side structure, also serves as cylinder guard protector, with reinforcement on both sides.
- Simple installation, can be used in conjunction with quick coupler/hitch.

  Contact Information:

  Sales Office:                                                                                                                                       Manufacturing Facility:

EIK Engineering Pte. Ltd.

Address: 99 Cashew Road, #13-07, Singapore 679670.
Tel: +65-9815 9685 Fax: +65-6877 0013

E-Mail: sales@eikengineering.com / info@eikengineering.com

EIK Engineering Sdn. Bhd.

Postal Address: Peti Surat No. 35, Pejabat Pos Skudai, 81300, Johor Bahru, Malaysia.
Factory address: PTD 72657, Jalan Seelong, Senai, 81400, Johor, Malaysia.
Tel: +607-5983082 / +607-5983087, Fax: +607-5983081

E-mail:  sales@eikengineering.com / info@eikengineering.com

Copyright © EIK Engineering Pte. Ltd. All Right Reserved.