Designed for Functionality, Engineered for Reliability

    Contact Information : info@eikengineering.com   

With our extensive experience in designing and manufacturing of excavator long reach boom, you can now maximize your ROI (Return On Investment) on your existing fleet of excavators. Hundreds of customers have realized the value of long reach attachment where standard boom failed to get the necessary job done effectively. Our long reach front attachment can help you to achieve more than 50% digging depth and forward reach over a standard boom, saving you valuable cost and time, and maximizing your bottom line. Only structural grade tensile steel is used in our boom and stick construction, and we do design it with various grades of tensile steel depending on the nature of the application. We supply long reach packages for various excavator models ranging from 20  to 160 metric ton.

Many are amazed to find that a small island country of Singapore has well over 10 years history of long reach application in the construction industry. Long reach excavators are such a common sight in almost all construction sites across Singapore. The significance is not because of its popularity, but the wealth of knowledge and cumulative experience gained over the decades in designing a reliable solution at the given price point. The many years of practical experience in fabrication and field  testing have provided us with a solid foundation in helping our customers to customized long reach solutions for their application needs.

Long reach front is an ideal solution for river and sea dredging either on land or barge, pond excavation and maintenance, deep foundation excavation, drainage construction, distant digging, etc.

EIK^® long reach, always within reach !

There is no customized component/part used in our attachment, we design it with commonly available off the shelf components where customers can easily obtain from their local Caterpillar, Komatsu, Hitachi and Kobelco dealers.  Each long reach package come standard with the following items:

• 1x boom

• 1x stick/dipper arm

• 1x bucket

• 1x bucket cylinder/ram

• 1x boom yoke pin

• 1 set of Hydraulic pressure hose

• 1 set of linkage

• 2x bucket pin

• 2x bucket link pin

• Full set of hydraulic piping/pluming

• Boom-to-stick locking arm (for 35ton class or smaller excavator only)

* The above specifications are for reference only, actual working range may vary from machine models.

** For the benefit of continuous product improvement, specifications are subject to change without prior notice.

A simple reconfiguration of mounting the hydraulic cylinder/ram at the underside of the stick/dipper arm would transform a typical long reach attachment to a simple high reach boom for demolition application.  A simpler and cost down version of a typical 3-piece demolition boom. A 2-piece demolition boom is also less taxing to control and operate, and operator can get the necessary job accomplished without going through major re-training, saving valuable time and cost.

It is also an excellent solution for slope forming where standard boom fall short in this respect.

  Contact Information:

  Sales Office:                                                                                                                                       Manufacturing Facility:

EIK Engineering Pte. Ltd.

Address: 99 Cashew Road, #13-07, Singapore 679670.
Tel: +65-9815 9685 Fax: +65-6877 0013

E-Mail: sales@eikengineering.com / info@eikengineering.com

EIK Engineering Sdn. Bhd.

Postal Address: Peti Surat No. 35, Pejabat Pos Skudai, 81300, Johor Bahru, Malaysia.
Factory address: PTD 72657, Jalan Seelong, Senai, 81400, Johor, Malaysia.
Tel: +607-5983082 / +607-5983087, Fax: +607-5983081

E-mail:  sales@eikengineering.com / info@eikengineering.com

Copyright © EIK Engineering Pte. Ltd. All Right Reserved.